【New, Unused】Cooling Vest

260430-01
Peltier Vest with 10000mAh High Capacity Battery, Cooling Vest
The Peltier vest, gaining attention for heatstroke prevention, is a cooling garment that supports comfortable wear even in extreme heat work environments. Equipped with three high-performance Peltier plates on the back, it directly cools the inside of the clothing. Its design efficiently cools the back area, where heat tends to build up, making it useful for combating heat during work. Size One size fits all, unisex. The side adjusters allow for easy adjustment to your preferred fit.
[Third-Party Inspection & PSE Certified] This product undergoes an external inspection by an independent inspection agency after manufacturing to check its appearance and product condition. Only products that pass inspection are shipped. The included mobile battery is PSE certified (conforms to the Electrical Appliance and Material Safety Act) and displays a mark indicating it meets the standards. [Ultra-Lightweight & Compact Battery] Despite its lightweight and compact design of approximately 165g, it is equipped with a 10,000mAh high-capacity battery.
[Operating Time and Charging] Low (Green): Approx. 6 hours, Medium (Blue): Approx. 4.5 hours, Fluctuating (White): Approx. 4 hours, High (Red): Approx. 3.5 hours (Fluctuating mode repeats 10 minutes of cooling + 2 minutes of off). *The above figures were measured in a 30°C environment. *Operating time and charging time vary depending on charging environment, frequency of use, operating environment, mode, and combination. (Charging Time) Approx. 4.5 hours *When using a DC5V⎓2A AC adapter.
[How to Install] ① Unscrew and remove the (fixing ring) from the main unit. ② Insert the device inside the clothing through the ventilation on the back (Velcro part). ③ Set the metal plate to face inward (towards your back) and adjust its position by rotating it in a natural direction so that the wiring is not pulled. ④ Align the claws inside the fixing ring with the notches on the stepped guide of the Peltier unit, push the main unit in, and lock it by turning to the right. *The guide has a three-step structure. *Be careful not to overtighten. ⑤ Plug the USB terminal of the Peltier unit into the mobile battery and store the cable in the battery pocket through the pass-through hole. ⑥ Attach the silicone controller to the metal eyelet on the right chest. ⑦ To remove, push in the fixing ring and turn it to the left to unlock.