35mm Film 120 Brownie Adapter 3D Printed

35mm Film to 120/620 Adapter (3D Printed)

◇ This adapter allows you to use 35mm film in 120/620 film cameras. It is self-made using 3D printing data and has been tested to fit approximately 30 types of film cartridges from various countries and eras. We have made it so that you can use older generation films and special LOMO films, so it may be slightly loose. If this is a concern, please adjust with masking tape or similar. Although we have tested it with a considerable number of cartridges, some special shapes like LOMO film may not fit.

◇ For material strength, we use PETG or ABS, not PLA.

◇ We cannot provide instructions on how to attach it to cameras, as many models like Rolleiflex are difficult to handle. We also cannot take responsibility for any usage issues. In the unlikely event that the film tears, it could cause damage to focal plane shutter cameras. Therefore, we recommend using this adapter with simple lens shutter cameras such as twin-lens reflex or press cameras.

◇ This product is created from self-made data using a 3D printer. As it is handmade, please understand that the color and shape may vary due to differences in manufacturing timing, slight variations in filament, the type of printer used, and molding precision. Film and camera are not included. Please note that the design may change without prior notice for improvements.