iPhone 5/6/7/8/X/SE1-2 SIM Card Converter

Compatible with iPhone 5/6/7/8/X/SE1-2
This is a SIM card switcher.
Please determine the use case at your own discretion.
This is a very convenient product.

The product is new and unopened.
A pin for removing the SIM tray is also included.

*The sample image shows usage with an iPhone 8.
The iPhone is not included with the product.

By removing the original SIM tray and installing a total of 3 Nano SIM cards on the specially designed board, you can switch between up to 3 lines.

Easily switch your mobile phone number (carrier) on a single mobile phone.
Simultaneous standby is not possible except for eSIM compatible models.
This convenient product reduces the stress of swapping SIM trays.
The board will protrude from the mobile phone body, so please use it after determining its purpose.
There is a risk of damage if the board is forcibly bent.
Please purchase only if you understand this.

Please refrain from requesting price reductions in the comments section.

How to Use
1. Remove the original SIM tray.

2. Insert the desired SIM card(s) into the special board (product) and prepare. Up to 3 Nano SIMs only.

3. Select either 1, 2, or 3 for the SIM card you want to use with the slide switch on the special board and insert it into the SIM slot.

4. In about 5-10 seconds, the carrier's signal will be recognized and it will be ready for use.

5. You can also check which SIM slot is selected by the blinking LED lamp on the board.

6. To switch SIMs, either remove the board once or slide it out slightly. When the No SIM card message appears, switch the slide switch to the desired SIM number and reinsert it.
You can continue to switch by repeating this process.

Note: The slide switch cannot be operated while the carrier is recognized.
Always slide the special board out slightly or remove it completely to switch from a state where the carrier's mobile data communication is disconnected (no SIM).