CO2 Regulator Conversion Adapter M15 P1.25 to 1/2-20UNF

CO2 Regulator Conversion Adapter M15 P1.25 to 1/2-20UNF for Green Gas 74g and Tetra Standard 38g Gas Conversion Attachment Adapter Connector

This is a CO2 conversion adapter.
It is a brass adapter for attaching a Tetra standard (B-38) 38g CO2 cylinder, which has a different thread standard, to a CO2 regulator compatible with Green Gas 74g.
Consider this for reducing running costs.

[Adapter Specifications]

Male thread side (regulator side): M15 thread pitch P1.25

Female thread side (Tetra cylinder side): 1/2-20UNF

[Installation Method]

Insert the Tetra cylinder from the side with the hexagon on the main body of the product.
If the threads are difficult to engage and the cylinder cannot be inserted, insert from the side without the hexagon.
By inserting from the side without the hexagon, the threads on the hexagon side will be in the correct state, allowing for insertion.
Once you confirm that the cylinder can be fully inserted from the hexagon side, attach the adapter to the CO2 regulator and then insert the Tetra cylinder.
If the cylinder is difficult to insert, first insert the adapter into the cylinder with a monkey wrench or similar tool, then attach it to the regulator.

[Beware of Other Companies' Products in the Same Price Range]

Other companies' products have many burrs and are of a quality that could cause injury if handled with bare hands.
The dimensions are also slightly different, and there is looseness due to the lower weight.
The internal threads and the surface treatment on the male side are also rough, and the quality is completely different from our product.

[Notes]

This product is the adapter only. The Sun Project regulator and cylinder shown in the photos are not included.
Please be sure to check the installation method.