For Yopi - Drip watering device for mounted Platycerium

Drip Watering System for Mounted Staghorn Ferns

No more getting tired from watering!
Eliminate the hassle of removing the board from the wall, the trouble of showering, and the heavy labor of soaking in a bucket.

Simply pour water into the funnel, made with a 3D printer, and this watering system will automatically drip-feed water slowly. It penetrates precisely where needed, drastically reducing your work time.

Furthermore, you can insert a bottle on top of the funnel, providing peace of mind during short trips or absences.
The drip speed can be adjusted to your preference, allowing you to customize it according to the size of your plant and its dryness level.

1 pc: ￥850
3 pcs: ￥1550
5 pcs: ￥2250
10 pcs: ￥4000
20 pcs: ￥7500
*Not eligible for discounts.

Precautions
1. The maximum capacity of the main funnel is 80mL.
The drip speed can be adjusted with the regulating nut at the bottom. At the slowest setting, it drips approximately once every 20 seconds.
2. The drip speed can be set by turning the regulating nut. The nut is designed to be slightly tight to prevent leaks. When turning, please use a cloth and turn slowly.
------------------------------------
Absolutely do not use tools such as pliers.
------------------------------------
3. During the first use or when completely dry, air may remain inside, which can hinder water flow.
Slightly adjusting the nut will initiate normal dripping.

Please refer to the link below for usage instructions.

https://www.instagram.com/reel/DQ4E39mk079/?igsh=MTNlbDd6eXE0eTZudw==

Plant parts such as staghorn ferns are not included. The images are for reference only.

This product is handmade as a personal hobby and is not mass-produced in a factory. We kindly ask that customers seeking a flawless finish refrain from purchasing.

Reproduction or imitation of the design is strictly prohibited!!