Simple Kintsugi Small Portion Set - Solves the problem with this 5-piece set for repairing cutlery and wooden tableware. Available in brown, black, and gold.

Easy-to-follow instructions will be sent to your transaction screen after your order.
Please help us go paperless.

This is a 5-piece set that includes all the necessary materials for simple Kintsugi, plus two additional paint colors (for a total of three colors).
It can also be used for repairing cutlery and wooden tableware.
Successfully fired!
Mix the paints to create your desired woody color. (^^?

Both the paints and the adhesive have received food hygiene safety certification.

We also sell a standard 3-piece set, a 2-piece set for crack repair, and a 2-piece set for putty, etc., depending on your needs.
#toikichi_kintsugi ← Click here to view.

● Holbein Pigment Ceramic Balloon Fine
5 grams (repackaged)

● Pebeo Porcelain Water-Based Acrylic Paint
◆ Gold 44
◆ Amber Brown 36
◆ Anthracite Black 42 (Black)

3cc (repackaged tube). The container capacity is 3cc, so there will be a small amount of air.
The porcelain paint is filled into the tube and then vacuum-sealed with a press seal.
This seal can be reapplied repeatedly, making it convenient for storage!

● Franklin Titebond III
Dispensing bottle with a screw cap. It's a 5ml bottle, but we fill it with 6ml.
(Excellent for storage, sealing, and ease of use)

For Pebeo paints, you can cut off the excess part of the packaging seal and attach it to the tip of the tube, then make a small hole with a needle to use it as a liner.
(This press seal is food-grade adhesive)
After use, do not remove it; simply put the cap back on for even better sealing!

We haven't experimented to see how much Kintsugi can be done with 3cc,
but according to the manufacturer's website, approximately one 50cm x 50cm area can be painted with 45ml.
Working backward from that,
with 3ml, a 1mm line would allow for a line of 16m 666cm 7mm... but is that really the case?
Although the container is labeled as 3ml, it doesn't actually hold 3ml no matter how hard we try.
(Please estimate the content to be slightly less than stated.)

We also haven't tested how much putty can be made with 6ml of Titebond III.
As a test, we made putty for the two plates shown in the 7th image using a 6ml container, but only a very small amount was used, and most of it was left over.

#kintsugi #simplekintsugi #porcelainpaint #kintsugikit #fauxkintsugi #kintsugiforbeginners #kintsugi #materials #repairingwoodendishes #repairingcutlery #woodpaint