White Ceramic and Enamel Repair Simple Kintsugi 3-Piece Set (Small Portions)

A guide on how to use it will be sent to your transaction screen after ordering.
(We appreciate your cooperation in going paperless)

This is a white version of our simple Kintsugi kit, for repairing white ceramics.
It is a small, portioned kit.

For our traditional simple Kintsugi, silver joinery, putty materials, individual items, and other necessary sets, please click the link below:
#とい吉金継ぎ ← Click here ?

Not only for tableware, but also for recovering chipped areas on white enamel and preventing rust ?
Since the white paint has a somewhat stiff pigment, we also recommend using it with our separately sold Porcelain Thinner.

By creating putty with ceramic powder, it can also be applied to chips on ceramic sinks and toilets.
When Pebeo's Porcelain paint is fired, its adhesive strength, durability, and hardness increase as the moisture evaporates.
While sinks, toilets, and tiles cannot be fired in a microwave or oven, they should last for several years if dried thoroughly after painting.

※ As this is currently an experiment, we believe filling chips with putty is generally okay, but we are still unsure about the long-term durability of the paint.
If it peels off, it seems like you can just repaint it, but please note that these are just ideas from an amateur like myself, and you are using this at your own risk.

Material Description ↓
● Pebeo Porcelain 150 Water-based Acrylic Paint for Ceramics, Ivory 43
Although the manufacturer calls it Ivory, it actually looks white.

3cc (Small portioned tube) The container capacity is 3cc and will contain a small amount of air.
Porcelain is filled into the tube and then vacuum-sealed with a press seal.
This seal can be reapplied repeatedly, making it convenient for storage ?
The container is labeled as 3ml, but no matter how hard we try, we can't fit 3ml in.
(Please estimate the content amount conservatively)

If you cut a small part of the excess seal and attach it to the tip of the tube, then make a small hole with a needle, you can use it as a liner as is ?
Please refer to the image.
(This press seal is made with food-grade adhesive)
After use, do not remove it; simply put the cap back on for even better sealing ?

● Franklin Titebond III
In a dropper bottle with a screw cap. It's a 5ml bottle, but we put 6ml in.
(Excellent for storage, sealing, and ease of use)

● Holbein Pigment Ceramic Balloon Fine
5 grams (Small portioned packaging)
This is a fine ceramic powder. Mix it with the bond to create putty for filling chips.