Hand Riveter Set with 4 Types of Rivets (10 pcs each)

This is a hand-type riveter used for driving rivets.
Includes rivets and is ready to use immediately.

*Please note that this is different in function from a hand nutter.

[Set Contents]

Hand Riveter Body

φ2.4mm Nose Piece x 1
φ3.2mm Nose Piece x 1
φ4.0mm Nose Piece x 1
φ4.8mm Nose Piece x 1

φ2.4mm Rivets x 10
φ3.2mm Rivets x 10
φ4.0mm Rivets x 10
φ4.8mm Rivets x 10

Nose Piece Replacement Wrench x 1

[Hand Riveter Body Specifications]
Overall Length: 235mm
Weight: 420g

[Rivet Specifications]

Applicable Thickness: 1mm - 4mm

Flange Diameter → Hole Diameter
2.4mm → 2.5mm
3.2mm → 3.3mm
4.0mm → 4.1mm
4.8mm → 4.9mm

*Some rivets may not be usable depending on the material of the flange and shaft.

Usable Rivets
(Material: Flange/Shaft)
?Aluminum/Steel
?Aluminum/Aluminum
Other materials cannot be used with this product. Thank you for your understanding.

[How to Use]

1. Select the nose piece according to the rivet diameter and attach it to the tip of the jaw case using the nose piece replacement wrench.
*Please perform the replacement while the handle stopper is engaged.

2. Remove the stopper on the handle.
The handle will open automatically.
*The spring has strong force, so hold the handle with one hand while removing the stopper.

3. Insert the rivet until its flange touches the tip of the nose piece.
*The rivet will not insert fully if the handle is not fully open.

4. Press the rivet against the pre-drilled hole you wish to rivet.

5. Squeeze both handles fully.
The rivet will be caulked, and the rivet shaft will break, completing the operation.
If the rivet shaft does not break, open the handles again and squeeze both handles fully.
*Be careful not to pinch your fingers in the handles.

6. Remove the rivet shaft from the jaw case.
*Failure to remove it may cause malfunction.
*If the shaft gets jammed, remove it with pliers or similar tools.