Drill Chuck Head Hex Shank SDS Impact Adapter Shank 4-Piece Set

Thank you for checking the product details!
If you are satisfied, please purchase immediately!

This is a drill chuck attachment for securing drills and other electric rotary tools.

Product Information
-------------------------
Set Contents
- Drill Chuck Main Body x 1
- Fixing Handle x 1
- 6.35mm Hex Shank x 1
- SDS Plus Shank x 1
- 1/2sq (12.7mm) Impact Adapter x 1
- Square Shank x 1

[Drill Chuck Main Body]
Size: 60mm x Φ33mm
Chuck Capacity: Φ1.5mm to Φ10mm
Mounting Thread: 1/2 20UNF

[Hex Shank Adapter]
Shank Width: For 6.35mm
Size: Approx. 52mm total length
The central fixing screw is reverse-threaded.
Example Tools: Electric Drill, Electric Screwdriver, Hex Handle

[SDS Plus 10mm Diameter Shank]
Shank Type: SDS Plus 10mm Diameter
Size: Approx. 65mm total length
The central fixing screw is reverse-threaded.
Example Tools: Hammer Drill, Rotary Hammer

[Impact Adapter]
Size: Approx. 36mm total length
Drive Size: 1/2sq 12.7mm
Example Tools: Impact Driver, 1/2sq Ratchet, 1/2sq T-handle
(Fixing pin and O-ring are not included in the set. Please prepare them separately if needed.)

[Square Shank]
Shank Type: Square, 9.3mm width
Size: Approx. 65mm total length
Example Tools: Hammer Drill, Rotary Hammer

*Important Notes*
- When using in reverse rotation (the direction that loosens the tool during installation), the drill chuck head and fixing shank may come apart. Please ensure the central reverse-threaded screw is securely tightened.
- Never use the drill chuck if it is not securely fixed or if the fixing is loose.
- Always turn off the power and ensure the electric tool is not rotating before attaching or detaching.
- When using for cutting, polishing, or grinding, wear protective eyewear and a mask, and ensure safety measures are in place before use.

Thank you for reviewing the product description.
If you wish to purchase, please proceed with the transaction!