Industrial Borescope, Endoscope, φ4.0×175mm with Handy LED Light

Industrial Borescope
Endoscope
Rigid Scope
φ4.0×175mm Field of View: 0° Direct View
Rechargeable Handy LED Illumination

Borescope Body Price: ￥153,000 (excluding tax)
Handy Light, Charger: ￥15,000 (excluding tax)
Total cost was close to ￥150,000.

Selling because I no longer need it.

Included in this listing:
Borescope body,
Separate sale handy LED illumination,
Separate sale battery for illumination x1,
Separate sale charger,
Separate sale USB cable for charger,
USB AC adapter.

There are some scuffs, but I believe it's in good condition.
The battery for the handy LED illumination is almost unused and has very little degradation.
The outer box is missing its top lid.

Confirmed not broken and confirmed working.

~Caution~
As the name Rigid Scope suggests, it does not bend.
It will break easily if forced into tight spaces, bent, caught on something, twisted around inside holes or gaps, poked in the bottom or entrance of a hole, dropped, or bumped.
Please use with the utmost care.
If the internal rod lens breaks, it may not be apparent externally, but when you look through it, it will be completely dark and you won't be able to see anything.

Before shipping, I will again strictly and reliably confirm that there are no breaks.
For the above reasons, cancellations cannot be accepted. Please consider this before purchasing.

Immediate purchase is welcome.

● Allows non-destructive internal inspection of small holes and narrow gaps that are out of direct human sight.
● Insert and observe inside holes and gaps of φ5mm or larger.
● Unlike fiber types which have a honeycomb structure that obstructs the field of view, this product uses a rod lens (a single rod-shaped lens) type, eliminating the honeycomb structure for a clear view of the entire area.
The honeycomb structure refers to the structure where the walls of each fiber (innumerable circles) appear like a honeycomb or the cross-section of cardboard.
● Insertion part size: Outer diameter φ4.0mm × 175mm
● Field of view direction: 0° (Direct view)
● Field of view angle (spread of vision): Approximately 60°
● Minimum focusing distance: Approximately 3mm from the tip
● Internal lens: Rod lens
● Insertion part material: 12Cr18Ni9 (Special stainless steel, not JIS standard)
● Operating environment temperature: -15 to 65℃ (non-condensing)
● Water resistance: Insertion part is waterproof, other parts are drip-proof.
*Resistant to gasoline, machine oil, and 5% saltwater.
● Rechargeable handy illumination: LED type, only on/off and flashing functions, dimming is not possible.
*This is for industrial use and cannot be used on humans.