2x4 Adjuster Set of 7 with Seat for DIY Catwalk

2x4 Adjuster Set of 7
Includes anti-slip sheets
Please comment for other quantities.

These are DIY parts for fixing 2x4 lumber vertically to create posts.
If you just want to set up posts, you don't need complicated procedures or special tools.
They can be securely fixed using the force of a jack, making them easy to install.

Imitation and plagiarism are prohibited.
Adjusters with only an upper part have existed for a while, but I thought about how to make it work for those without an 8mm drill, and came up with and created the lower part. I invented the drill-free type.

DIY Storage Parts

Washers have been added between the hexagonal top part and the wood. This addition provides stability and acts as a lock nut.
 Therefore, when assembling the upper part, please insert the washer onto the bolt before inserting it into the hole.

Assembly
Since it will be shipped disassembled, please insert the washer onto the bolt as shown in photo 3, lightly tighten it (do not overtighten), insert the wood, then add the washer, nut, nut, and washer in that order, and tighten the upper part with the nut.

Installation Method
① Cut the 2x4 lumber that will be the post to a length of approximately 80mm less than the installation height.
② Screw the lower part of the adjuster to the top of the 2x4 cut in ①. (Photo 4)
③ Insert the threaded part of the upper adjuster into the hole drilled in the post in ②.
④ Once positioned in the installation location, stand it vertically (use a level), and you can tension it by turning the lower nut clockwise with a wrench.
〇 Please sandwich the anti-scratch sheets between the floor and ceiling, at the bottom of the post and on top of the adjuster. Attaching them with double-sided tape is easy.
Required Tools
〇 13mm wrench or monkey wrench or similar tool to turn the nut
〇 Electric drill or impact driver or Phillips screwdriver
〇 Saw (You can also have it cut at a home improvement store)
〇 Level (Apps are also available.)
Drill not required

Due to being handmade, there may be slight variations.
Painted versions are also possible, so please contact us.

Any quantity is possible. Please contact us.

#Adjuster
#Cat Tower
#Cat Walk
#Wall Mounted TV
#Tension Wall Storage
#Partition
#Anti-tip
#Washing Machine Shelf