Parabolic Antenna Mount / BS Antenna Balcony Mounting Bracket

This is the mounting bracket and stays that were used to install a Maspro BS45B parabolic antenna.
It was attached by clamping it to the top of the concrete wall in front of the balcony.
The width was likely that of a standard concrete block wall or slightly wider, but it could be expanded up to 14 cm, so it should be fine.
Although I'm not entirely sure, I believe it can be expanded by about another 5 cm.
Please contact me if you need me to measure it.
The cylinder has a diameter of 4 cm and a height of approximately 39 cm. The height from the top of the fixing part on the right side of the first image is about 20 cm. The height of the fixing part, including the clamping section, is 20 cm, and the width is about 30 cm.

This is a used item with scratches and dirt, so please refrain from purchasing if you are looking for a pristine item.
However, there are no functional issues. You will need a spanner or similar tool to loosen and tighten the screws as shown in the third image.
We ask that only those who can complete the transaction on a no-claim, no-return basis purchase this item.