【Price Reduced Again】PC Exclusive Acrylic Leverless Controller with Silent Rings Installed COH

【Clearance Sale Price Reduction】
This is a custom-made acrylic leverless controller, ACR-01.
The main board is a Raspberry Pi Pico board (GP2040-CE).
The buttons are Sanwa Denshi buttons equipped with 1mm thick silent silicone rings to shorten the key travel.

This controller is for PC only. A converter is required for use with PS5.
The button layout is optimized for Street Fighter 6, but it should also be usable for other fighting games.
Dimensions: 180mm x 300mm x 36mm (excluding buttons)
The case uses pillars from Kuromaki Kobo.
*As this is for PC only, the Share button will not function.
By holding down the Start button and connecting to your PC, you can access the settings screen at: http://192.168.7.1/
You can configure SOCD settings, Xinput connection, and other settings.
*A converter such as Brook WingmanFGC2 is required for PS5 use.
*USB cable is not included.

====================
Chiyoman Open Hands【C.O.H.】
Chiyoman Open Hands
I create controllers based on the functions and designs I desired as a musician and guitarist.
- Button layout designed for use with both hands in an open position, without resting the right thumb on the weak kick button.
- Additional holes have been added for the left pinky finger, as many guitar and keyboard players utilize their left pinky.
- The case is screw-fastened to prevent interference with meters on surrounding equipment, which can occur with magnetic closures.
- The USB-C jack is located on the upper side.
- Internal cables are not bundled to simplify maintenance in case of cable breakage.

- Brand: C.O.H.
- Connection Terminal: USB-C
- Case Material: Acrylic
#LeverlessController
#ArcadeController
#StreetFighter6
#FightingGame
#SF6
#Tekken8
#ChiyomanOpenHands
#COH
#ChiyomanOpenHands

Thank you for viewing.