Freenove ESP32 / ESP32-S3 Breakout Board
Freenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM with Pin Header Terminal Block Shield HAT, 5V 3.3V Power Output, GPIO Status LED
Color:Breakout Board for ESP32 / ESP32-S3[
Compatible Models: Freenove ESP32 / ESP32-S3 series (Note: Not compatible with boards from other manufacturers due to different pin assignments) (Requires download, no paper tutorial. English only)
GPIO Status LED: The LED lights up when the GPIO outputs or inputs a high level, and turns off when it outputs or inputs a low level.
Independent LED: The status LED is driven by the chip, not the GPIO, so it does not affect the GPIO.
Power Circuit: Provides multiple 5V and 3.3V power outputs (when using external power, 5V output is up to 3A).
Terminal Blocks and Headers: Connects to all pins of ESP32 / ESP32-S3 with a pitch of 2.54mm (0.1 inch).
Color:Breakout Board for ESP32 / ESP32-S3[
Compatible Models: Freenove ESP32 / ESP32-S3 series (Note: Not compatible with boards from other manufacturers due to different pin assignments) (Requires download, no paper tutorial. English only)
GPIO Status LED: The LED lights up when the GPIO outputs or inputs a high level, and turns off when it outputs or inputs a low level.
Independent LED: The status LED is driven by the chip, not the GPIO, so it does not affect the GPIO.
Power Circuit: Provides multiple 5V and 3.3V power outputs (when using external power, 5V output is up to 3A).
Terminal Blocks and Headers: Connects to all pins of ESP32 / ESP32-S3 with a pitch of 2.54mm (0.1 inch).
Category
Distribution Devices, Pa Equipment, Recording Equipment
Condition
New/unused
Shipping
Included in price (by seller)
From
Kagawa
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
