BOSE Full-Range Speakers - Custom Modified Pair

This is a custom-built speaker system using a 6cm full-range unit from a BOSE Wave music system, housed in a separately acquired enclosure. The unit shows some signs of use but is generally in good condition. The enclosure is constructed from 10mm thick MDF with a decorative sheet applied. Since the hole for the unit on the front baffle was too large, a sub-baffle of the same thickness MDF was made to mount the unit. The original rear had direct wire output, so banana plug-compatible terminals have been added. The speaker grille is in good condition, but due to interference with the unit's frame, it is mounted slightly shallow.

The sound produced is characterized by pleasant low frequencies and a soft, well-balanced tone across the entire range, with particularly impressive vocal resonance. How about this as a companion for near-field listening?

Please note that this is a custom build by an amateur. Your understanding is appreciated before purchase.

Unit:
   Impedance: 4Ω

Enclosure: Internal volume approx. 2.8L
   Unit mounting hole diameter: φ65mm
   Mounting screw hole diagonal: approx. 78mm
   Bass reflex port: Inner diameter 30mm, Length 64mm (fd design value approx. 89Hz)
   Dimensions: W approx. 127mm × H approx. 205mm × D approx. 165mm
   Weight: Approx. 1.3kg (per unit)