【Original Work】KEYENCE PLC Communication Cable (Compatible with OP26486 + OP26487)
This is a compatible product for KEYENCE OP-26486 + OP-26487 (self-made). The cable length is approximately 1m (2m and 3m lengths are also available in separate listings). This is a cable for connecting a PC and a PLC via RS232C.
It can be used with KV10-90, KV-16AR, KZ-A500, etc., and a PC (KV-STUDIO). It can also be used as a serial communication cable for KV-1000, KV-3000, and KV-5000.
Operation confirmed with KV10-DT and KV-1000 (serial communication) (using BUFFALO USB-to-Serial conversion cable).
* Please refer to Image 3 for KV-STUDIO's Communication Settings. [Please note that the COMM port may change to COMM4, COMM5, etc., depending on your PC settings or USB-to-Serial conversion cable.]
* Please be aware that communication may not be possible with ELECOM USB-to-Serial conversion cables only.
* Ships via Yu-Packet Post Mini.
It can be used with KV10-90, KV-16AR, KZ-A500, etc., and a PC (KV-STUDIO). It can also be used as a serial communication cable for KV-1000, KV-3000, and KV-5000.
Operation confirmed with KV10-DT and KV-1000 (serial communication) (using BUFFALO USB-to-Serial conversion cable).
* Please refer to Image 3 for KV-STUDIO's Communication Settings. [Please note that the COMM port may change to COMM4, COMM5, etc., depending on your PC settings or USB-to-Serial conversion cable.]
* Please be aware that communication may not be possible with ELECOM USB-to-Serial conversion cables only.
* Ships via Yu-Packet Post Mini.
Category
Pc Cable / Connector
Condition
Almost new
Shipping
Included in price (by seller)
From
Shiga
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
