Marui Hi-Capa 5.1 Compensator ABS
This is a compensator compatible with the Marui Hi-Capa 5.1 series.
It has a very strong tactical image design.
The 8 slots on the bottom rail enhance its imposing appearance and versatility for accessory attachment.
It also functions as a strike face, meaning the hammer will drop even if the muzzle is pressed against something.
*This is only compatible with Hi-Capa models that have a rail adapter installed. It is not compatible with models without a rail adapter or electric versions.
It can be attached to the BATON BS-HOST, which comes standard with rails, but it is recommended to remove the muzzle cap.
It is likely compatible with the 14R, Gold Match, and DOR.
If it does not fit, we will offer a refund after confirming with photos.
To install, slide it on from the front along the rail and tighten the grub screw on the bottom with a thin hex wrench.
(Be careful not to overtighten.)
We have incorporated separate parts to prevent damage to the main body.
To remove, loosen the grub screw, then lightly tap the bottom of the barrel with a soft material like rubber and pull it off.
Compatibility with barrels with silencer threads has not been confirmed, but if the part extending from the slide is narrowed by threading, it may fit by removing the thread cover. Please confirm this yourself.
■Important Notes
The compensator and grub screw (pre-installed) are the items for sale.
Please note that the gun, custom magazine bumpers, etc., are not included.
When installing, always leave a gap of about 0.4mm so that the slide does not hit it.
The design may change for improvement purposes.
As this is a personal product made with a 3D printer, there may be some roughness or minor scratches as shown in the photos. Those who are sensitive to condition or concerned about its state should refrain from purchasing.
Made of ABS resin.
It has a certain degree of strength, but please handle with care.
We offer a 2-week warranty against breakage.
We offer a slight discount for bulk purchases.
Resale at high prices and unauthorized use of images are prohibited.
Please be aware of high-priced resellers on platforms like Amazon.
#Other Original Custom Parts Here
It has a very strong tactical image design.
The 8 slots on the bottom rail enhance its imposing appearance and versatility for accessory attachment.
It also functions as a strike face, meaning the hammer will drop even if the muzzle is pressed against something.
*This is only compatible with Hi-Capa models that have a rail adapter installed. It is not compatible with models without a rail adapter or electric versions.
It can be attached to the BATON BS-HOST, which comes standard with rails, but it is recommended to remove the muzzle cap.
It is likely compatible with the 14R, Gold Match, and DOR.
If it does not fit, we will offer a refund after confirming with photos.
To install, slide it on from the front along the rail and tighten the grub screw on the bottom with a thin hex wrench.
(Be careful not to overtighten.)
We have incorporated separate parts to prevent damage to the main body.
To remove, loosen the grub screw, then lightly tap the bottom of the barrel with a soft material like rubber and pull it off.
Compatibility with barrels with silencer threads has not been confirmed, but if the part extending from the slide is narrowed by threading, it may fit by removing the thread cover. Please confirm this yourself.
■Important Notes
The compensator and grub screw (pre-installed) are the items for sale.
Please note that the gun, custom magazine bumpers, etc., are not included.
When installing, always leave a gap of about 0.4mm so that the slide does not hit it.
The design may change for improvement purposes.
As this is a personal product made with a 3D printer, there may be some roughness or minor scratches as shown in the photos. Those who are sensitive to condition or concerned about its state should refrain from purchasing.
Made of ABS resin.
It has a certain degree of strength, but please handle with care.
We offer a 2-week warranty against breakage.
We offer a slight discount for bulk purchases.
Resale at high prices and unauthorized use of images are prohibited.
Please be aware of high-priced resellers on platforms like Amazon.
#Other Original Custom Parts Here
Category
Toy Gun
Condition
New/unused
Shipping
Included in price (by seller)
From
Kanagawa
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
