Jazzmaster Type Light Blue Component Modified Electric Guitar

This is an unbranded item.
The overall condition is rated as poor due to issues with the paint and other aspects.
Please check the images and description. Also, please carefully read the description regarding any concerns or shipping before making your decision.

This is a component guitar I purchased from someone else. I mainly used it for display and occasionally played it.
The block inlays on the binding have a striking light blue color.
A repair logo is attached.
I think it would be good for preparing the base and repainting it, or for parts for modification.

Weight: 3.3-3.4kg. Frets remaining: 95% or more.
The electronics are in working order.
String height is about 2mm on the 6th string and about 1.5mm on the 1st string, which is a bit high. The truss rod has been turned once and returned to its original position. The body wood is unknown, but it is lightweight and easy to handle.

Current Main Specifications:
Uses retro tone brass and pure tone / plate / cold steel.
Pickups: Two handmade pickups with a retail price of around 30,000 yen.
In my listening, the front pickup had a stronger output.
All pots, including the preset, are 1MΩ for improved overall tone clarity. I adjusted it with the tone control.

Capacitors: Tone is 333, preset tone is 223.
Copper foil tape is applied inside the body and on the pickguard for noise reduction without ground wires.
All cold wires are also attached. They can of course be cut. The pickguard film is peeling, so if you remove it, it will be as good as new.

Points of Concern:
The paint and construction are generally rougher and cruder than standard products. There are dents and scratches all over from use.
I played it while sitting, but the strap pins have not been attached since purchase. They can be added, so please comment after purchase.
The pegs have been modified for installation.
The nut width is a bit narrow, and it currently has a crudely made bone nut.
Some fret ends have small gaps, and they can catch on a cloth when wiping. They were not protruding enough to cut your hand.
The holes in the neck are not drilled to standard specifications, so modification (filling and drilling) is required when combining with other necks or bodies.
The preset switch is usable, but it does not turn very smoothly.
The tremolo arm's effect is weaker than a Stratocaster's. Please consider replacing it if you are concerned.

For shipping, the strings will not be loosened. The main unit will be wrapped in bubble wrap, packed with cushioning material to prevent damage and minimize movement, and shipped in a guitar box.