Clearance Price: 5F1 Champ Cabinet (8-inch spec) - Handmade - Mahogany Color

How about this for those who are building their own 5F1 Champ, etc.?

We are a furniture maker.
We build amplifier cabinets and speaker cabinets in our spare time.
This is a cabinet previously made for the 5F1 Champ.
We selected SPF lumber with few knots from commercially available wood.

Speaker: 8-inch specification
Body: SPF lumber (18mm thick)
Front panel: Oak (10mm thick)
Back panel: Lauan plywood (9mm thick)
Grille cloth: Guitar Amp
Baffle board: MDF (12mm thick)
Speaker mounting screws (4-point mounting, 5x20 truss head small screws included)
Speaker mounting screw position: 197mm
Rubber feet: Commercially available
Finish: Oil stain (mahogany color), urethane sanding sealer base coat, urethane half-flat finish coat
Dimensions: W330 x D200 x H340 (including 10mm rubber feet)
Weight: 3kg

We put a lot of effort into making this carefully, so it is solidly built and affects the sound.
It is also heavy, so it does not feel flimsy.
The wood grain is continuous as it is assembled from a single board.
The older growth rings (which were on the outside of the wood when it was growing) are on the outside of the cabinet, just as they were when the tree was alive.
The main body is joined using half-blind dovetail joints.
We strive to build as carefully as possible, but there may be scratches, dents, warpage, chips, cracks, uneven color, uneven finish, or speaker mounting marks from the manufacturing process. Please judge from the photos.
This cabinet does not come with a speaker.
Please note that only the cabinet is for sale.

How to mount the speaker:
Remove the back panel and attach the speaker from the back using the included screws.
Be careful not to overtighten the screws.
The speaker mounting screw position is 197mm, so please confirm if it will fit before bidding.
If the screws do not fit due to a slight difference, please enlarge the speaker's screw holes.

How to mount the chassis:
By looking at the diagram, you should be able to determine if the chassis dimensions are compatible for mounting.
There are no pre-drilled holes for mounting the chassis, so please process and install it yourself.
There may be slight errors in the dimensions compared to the actual product.

Shipping will be via Yamato Transport (cash on delivery, drop-off discount applied).