Nine Ball Custom Lower Frame "RR" for Hi-Capa 5.1 5.11②

This is a custom lower frame made by Laylax.

[Compatible Models] Tokyo Marui Gas Blowback Hi-Capa 5.1 Series (excluding D.O.R) *Please confirm with Laylax for details.
[Product Condition]
・Used once on a skirmish field after being attached to an airsoft gun.
・There are scuff marks from use.
・During installation, the joint with the gun's chamber cover was tight, so I slightly shaved down this product (silver part in the center of photo 6).
[Impressions]
My impressions from actual field use are as follows:
・There is vertical play between the slide and the frame. This may be why the hammer sometimes goes to half-cock. This symptom was resolved by applying tape to the hammer's slide contact point to add thickness. *This did not resolve the slide play.

*The above symptoms may be due to compatibility issues with the airsoft gun I own, but similar symptoms occurred with both the Hi-Capa 5.1 and 5.1R I own.

*For assembly instructions, please refer to Laylax's video and the explanation on the back of the box.

[Important Notes]
Please consider purchasing after confirming and agreeing to the following points. No claims or returns (NC/NR).
① This is a condition check by an amateur. There may be overlooked areas, so this is not absolute.
② Although used a few times, this is a used item. Please refrain from purchasing if you are looking for a perfect item or are sensitive.
③ Depending on the individual differences of each gun, it may not be possible to install, or modification of the main unit or this product may be necessary.
④ The symptoms described in Impressions may occur with the buyer's airsoft gun.
⑤ The item will be shipped using recycled packaging materials and the minimum necessary.
⑥ The product includes only the main unit and the box. Screws are not included originally.