ScanSnap Roller Replacement Silicone Tube Repair for s1500/s500

Trying out some budget-friendly options.
Due to management constraints, I will only list these when I have spare time.

Set of 4, cut with a tube cutter.

Not an original product.
These are silicone tubes for replacing the feed rollers and ejection rollers of the Scan Snap S1500/S1500M.
Silicone tube: Inner diameter 6mm, Outer diameter 12mm, Length approx. 24mm (slight variations possible).

Cut with a tube cutter.

These are for replacing the deteriorated rubber rollers of the ScanSnap. There are two methods: complete disassembly or partial replacement by making a vertical slit. These tubes can be used as-is for complete disassembly or by making a slit for partial replacement.

Method for Complete Replacement:
The process is too lengthy to describe here, so please search online. While it takes time, the result is aesthetically perfect with no difference in normal use.

Method for Partial Replacement:
1. Remove the feed rollers and ejection rollers by making a vertical slit with a cutter and pulling them off. If hydrolysis has progressed significantly, you may need to clean off stickiness with anhydrous ethanol and cotton swabs.
2. Make a vertical slit in the new tube and fit it onto the feed roller and ejection roller shafts, utilizing the rotation of the power button to help.
Some people use adhesive, but it is not necessary. Only apply adhesive if you wish to do so.

I am selling surplus items from personal purchases, so the quality differs from products sold by companies. If you are concerned about burrs, please purchase those instead.
If the quantity is insufficient, a refund will be processed.