Tokyo Marui M3 M4 Stock Adapter TYPE 2

Thank you for viewing our product.

This product is made using a fused filament fabrication 3D printer.
It is made from PLA material.

This is an adapter that allows you to attach an M4 stock to a Tokyo Marui M3 Shorty.
Compared to TYPE 1, this model has an integrated stock tube, so you can use it simply by providing your preferred slide stock.
To install, remove the grip mounting bolt on the main unit and attach it to the main unit using the included bolt.
*Please keep the installation torque to approximately 1-2 N・m.

*The main unit is secured with a single bolt, so please retighten the bolt if it becomes loose.

Color: Matte Black
Stock tube diameter: Approximately 29mm (Mil-spec compliant)

As this is a 3D printed product, layer lines may be visible.
If this is a concern, you can finish it with sandpaper or other tools.

Regarding Strength:
This product uses PLA material and does not have the same strength as metal products. It may break if excessive force is applied or if it is hit hard.
*Please do not use items such as stabilizer braces or pistol braces that place a strong load on the stock adapter itself.

Set Contents:
- Main Unit
- 1 x M5 x 90mm Hex Bolt for Installation
- 1 x M5 Washer for Installation

As this is a 3D printed product, shipping may take some time.
Also, the shape may change depending on the production period due to improvements.

*The firearm and slide stock are not included.