Jazzmaster Bridge Post Bushing Set (4 pcs) - Brass & Resin

At SUMI Guitar Parts, we leverage our experience working in musical instrument stores and in guitar building and repair to offer high-quality products that meet a certain standard of excellence.

This is a mixed set of brass and resin bushings designed to secure the bridge (preventing front-to-back movement) on guitars such as the Jazzmaster, Jaguar, and Mustang.

The dimensions are as follows: 6.5mm diameter on the bridge post side, 8mm diameter on the anchor side, 13mm diameter for the flange, and 1.5mm thickness for the flange (both brass and resin bushings share the same specifications).

Important Notes ↓

Brass bushings may require a more precise fit than resin bushings. Please only purchase if you understand that you may need to file or otherwise adjust the size to fit your specific bridge.

These bushings may fit some guitars perfectly, while others may be slightly tight or loose. If you encounter a fit issue, please try the following methods ↓

If too tight:
- Apply lubricant to the bushing and/or bridge post (please try this before filing the brass bushing for size adjustment).

If too loose:
- Wrap masking tape around the bridge post to create a snugger fit.

*We cannot accommodate issues arising from the guitar's own manufacturing tolerances (individual variations). For example, on guitars with significant misalignment between the bridge hole on the pickguard and the bridge hole on the guitar body, the bushing's flange may interfere with the pickguard, preventing proper installation (in some cases, filing down the flange may allow for installation).

*Please be sure to carefully check the bridge dimensions of your own guitar before purchasing.

Shipping will be via Yu-Packet (post-delivery with tracking service) at no additional charge.
*To prevent issues for both parties, we cannot accommodate requests for shipping methods without tracking services.
#Jaguar
#mustang
#jazzmaster
#ジャガー
#ムスタング