SANEI Ultrafine Bubble Washing Machine Adapter PM100-20 Easy Installation

Experience the difference with repeated washes just by installing it between your washing machine and hose.
Washing machine adapter with built-in patented ultra-fine bubble generator.
Can be installed on most fully automatic washing machines.
Washing with ultra-fine bubble water reduces residual dirt by 59% compared to washing with normal water, making it harder for dirt to accumulate.

Dirt Removal Comparison
Repeated Washing with Dirt Applied 10 Times (n=1)
Comparison of residual dirt when washing with UFB water versus normal water.
- Installation Size: G3/4 (Standard screw size for domestic fully automatic washing machine water inlets)
- Material: Brass, Polyacetal, EPDM
- Usable Temperature: 60°C
- Water Pressure: 0.05MPa (dynamic pressure) to 0.75MPa (static pressure)

[Specifications]
- Model: PM100-20 (PM10020)
[Superior Cleaning Power] Generates approximately 61 million/mL of ultra-fine bubbles. These ultra-fine bubbles penetrate deep into dirt to remove it.
[Experience the Difference with Repeated Washes! A Difference in Residual Dirt.] Compared to washing with normal water, ultra-fine bubble water reduces residual dirt by 59%!

[Install on Your Washing Machine's Water Inlet] Simply install between the washing machine and the water supply hose! No tools required for installation. (Touching the screw part with bare hands may cause injury. Always wear rubber gloves or work gloves when installing.)

[Compatible Washing Machines] Compatible with fully automatic washing machines with a screw-in type water inlet (G3/4). The screw diameter for fully automatic washing machine water inlets is standardized nationwide. Can be used with both top-loading and drum-type washing machines.

*Depending on the specifications of other manufacturers' hoses, water leakage may occur from the hose connection. Also, if your washing machine hose has a permanent bend, lateral force may be applied to the adapter, leading to water leakage. In such cases, please purchase and replace the hose with a SANEI washing machine hose. Additionally, please check carefully before use, as the following installation methods can cause water leakage or damage the screw threads.

1. Adapter installed at an angle to the washing machine side.
2. Hose connection installed at an angle.
3. The washing machine's water inlet is damaged or deformed. *We cannot provide a warranty if the washing machine becomes unusable due to damaged screw threads, etc.

*Please be careful, as attempting to install it forcefully can cause water leakage or damage the washing machine's screw threads. Also, please check for water leaks after installation.